Support

Need help? Reach out to our support team for quick and reliable assistance. We're here to support you.

FAQ

General Product Information
01
Are these bone-conducting type earphones?

This product is not a bone-conducting type. Instead, it is an open-ear type that transmits sound by air vibration. PSZ (Personalized Sound Zone) technology allows sound waves to cancel each other out at a set distance from the driver (the source of the sound), preventing leakage of sound to the surrounding environment.

02
Does this product support noise canceling?

The product is an open-ear type that takes in outside noise naturally, and so does not support noise canceling.

03
Can the ear cushions and ear pads be removed and replaced?

The MWE001, MBE001, and MBN001 ear cushions and the nwm ONE ear pads cannot be removed or replaced. Removing them forcibly may damage the product.

04
There is no sound.
  • Please confirm that the device is securely connected to the device in use.
  • For Bluetooth connection type products, please confirm that the connection is made via Bluetooth. If this is not paired, configure by following the procedure shown here (FAQ_link to pairing method).
  • Check that the volume on your device is not turned down.
  • Restart the audio app that you are using for listening. Restarting the device that you are using, such as the smartphone or PC, may resolve the problem.
05
The sound volume is low.
  • Because this product is an open-ear type affected by outside noise, the listening environment may make it difficult to hear sound from the product.
  • In order to use PSZ technology for sound leakage prevention, playback at a higher volume than regular earphones is required. This is a characteristic of the product, not a malfunction.
  • For wired-type products, depending on the model of conversion connector used, it may result in a lower volume. Either try using a different conversion connector or connect to a device that does not require such a connector, then check how it sounds.
  • This problem may be resolved by adjusting how the product is worn. Check that the product is being worn correctly.
06
My ears hurt.
  • If you feel any pain or abnormality, immediately stop using the product.
  • Check that the product is being worn correctly.
07
“LE_Product name” and “Product name” are displayed on the Bluetooth device screen.
  • At first, “LE_Product name” is displayed, then after a few seconds, “Product name” is displayed.
  • During device selection, wait until “Product name,” not “LE_Product name,” is displayed before selection.
08
Can Bluetooth be used overseas?

The Bluetooth function of our products has only acquired certification under the radio wave and other laws of the country of sale.  Use of the Bluetooth function in some countries and regions is restricted.  When using our products in other than the country of sale, confirm the laws, regulations, and other conditions of the country or region in which they will be used.

09
Can this product connect to devices other than smartphones?

The product can connect to devices supporting Bluetooth. Carefully read the instruction manual of the device to connect to before use. This product is not guaranteed to work with all devices.

10
Is multi pairing supported?

It is supported.

What is multi-pairing? 

A function that enables the retention and memory of pairing information for multiple Bluetooth devices.

11
Is multipoint connection supported?

It is supported.
Two Bluetooth-compatible devices can be connected simultaneously.
‍* In the case of the MBE001, update the firmware from the nwm Connect app.
Note that the following versions and later are supported.
App version: 1.2.0 for Android / 1.2.0 for iOS
Product firmware: 2.0.0 for Android / 2.0.0.0 for iOS

12
There is no sound on the earphones from the second device when using a multipoint connection.

Multipoint connection is a feature that can simultaneously connect two devices in standby. However, audio can only be played from one profile of one device. Audio cannot be played from two devices simultaneously.

13
I cannot make multipoint connection.

For details on how to connect, check the online instruction manual. Also check the instruction manual of your Bluetooth-compatible device.

About the nwm Connect App
01
How do I pair the earphones?
accordion iconaccordion icon

Follow the procedure shown in the dedicated app to configure pairing.
(Download the dedicated app from here)

For details, refer to the online instruction manual.

02
I cannot install the nwm Connect app.
accordion iconaccordion icon

Android version 10.0 or later is required.

iOS version 15.5 or later is required.

03
Can I download the nwm Connect app from outside the country of sale?
accordion iconaccordion icon

If the Store Country/Region setting is set to a country/region other than the country/region where the product is sold, you may not be able to download the application.

04
The screen does not proceed from the “Wearing” screen.
accordion iconaccordion icon

For Android, allow location information and try again.

05
I cannot connect to the nwm application.
accordion iconaccordion icon

Please update the nwm Connect app to the latest version.If you have already paired your smartphone with Bluetooth, please unpair it once and then try again.

06
I cannot change the equalizer.
accordion iconaccordion icon

The equalizer cannot be adjusted during calls.

07
What is 360 Reality Audio?
accordion iconaccordion icon

360  Reality Audio uses Sony’s 360 spatial sound technology to create an immersive  three-dimensional sound field that gives the listener the feeling of being  enveloped in an artist’s performance.
See here for details.

08
Is the 360 Reality Audio personal optimization feature supported?
accordion iconaccordion icon

This is only supported on the nwm ONE.
Optimization is possible in the nwm Connect app.

07
I cannot proceed from "Connecting to a nwm device." while connecting to the nwm application.
accordion iconaccordion icon

If you have already paired your smartphone with Bluetooth, please delete the pairing and try again.

・Please allow "Location Information" and "Nearby Devices" in the permission settings of the nwm Connect application from the Android settings.
※Depending on the OS version, only "Location Information" is available.

If you are using security software on your Android device, location information may be forced to be turned off. Please change the setting of "Location Information OFF" to "ON" from the security software to improve the situation.

08
Are these bone-conducting type earphones?
accordion iconaccordion icon

This product is not a bone-conducting type. Instead, it is an open-ear type that transmits sound by air vibration. PSZ (Personalized Sound Zone) technology allows sound waves to cancel each other out at a set distance from the driver (the source of the sound), preventing leakage of sound to the surrounding environment.

09
What codecs are supported?
accordion iconaccordion icon

This product supports SBC, AAC, and aptX.

10
Can I make calls?
accordion iconaccordion icon

This product features a built-in microphone, enabling hands-free calling.

11
Can the earphone be used with one side (one ear) only?
accordion iconaccordion icon

It can be used in one ear on its own. In these cases, the other side of the earphone that is not used must be returned to the case. Both music playback and calls are possible, and these will be monaural. Both the left and right side incorporate microphones, but in this case, the microphone on the earphone in the ear is used.

12
Does this product support noise canceling?
accordion iconaccordion icon

The product is an open-ear type that takes in outside noise naturally, and so does not support noise canceling.

13
How is the waterproof performance of the product?
accordion iconaccordion icon

The product features IPX2-equivalent water resistance, meaning it is not fully waterproof. This means that the product should not be used in wet environments such as in the rain, or with strenuous exercise that causes sweating.

14
Does the carrying case incorporate a battery?
accordion iconaccordion icon

No, it is not incorporated. Connect the cable to the carrying case to charge.

15
Can this product connect to devices other than smartphones?
accordion iconaccordion icon

The product can connect to devices supporting Bluetooth. Carefully read the instruction manual of the device to connect to before use. Not all devices are guaranteed to work with this product.

16
Is a wired version of this product available?
accordion iconaccordion icon

You can purchase a wired version from here.

17
How do you turn the power on and off?
accordion iconaccordion icon

Take out the product from the carrying case to turn on, and return it to the carrying case to turn off.

18
I cannot install the nwm Connect app.
accordion iconaccordion icon

Android version 10.0 or later is required.

iOS version 15.5 or later is required.

19
“LE_Product name” and “Product name” are displayed on the Bluetooth device screen.
accordion iconaccordion icon

At first, “LE_Product name” is displayed, then after a few seconds, “Product name” is displayed.

During device selection, wait until “Product name,” not “LE_Product name,” is displayed before selection.

20
I have updated the device name, but the display has not changed.
accordion iconaccordion icon

After changing the device name, return the product to the carrying case, then reconnect to the app.

21
I cannot change the equalizer.
accordion iconaccordion icon

The equalizer cannot be adjusted during calls.

22
The earphones unintentionally become mute during a call.
accordion iconaccordion icon

Turn the on-ear detection sensor “OFF” and try again.

23
Music suddenly stops during playback.
accordion iconaccordion icon

Turn the on-ear detection sensor “OFF” and try again.

24
Does the product have a volume limiting function?
accordion iconaccordion icon

This function is in the app, and the maximum volume can be set to 85 dB.

25
Is multi-pairing supported?
accordion iconaccordion icon

It is supported.

What is multi-pairing? A function that enables the retention and memory of pairing information for multiple Bluetooth devices.

26
Is it support multipoint connections?
accordion iconaccordion icon

This is supported.

Update the firmware from your app. Note that the supported versions are as follows.
App version : Android 1.2.0 / iOS 1.2.0
Product firmware : Android 2.0.0 / iOS 2.0.0.0

The product can be connected to two Bluetooth-compatible devices simultaneously.

27
There is no sound on the earphones from the second device when using a multipoint connection.
accordion iconaccordion icon

Multipoint connection is a feature that can simultaneously connect two devices in standby. However, audio can only be played from one profile of one device. Audio cannot be played from two devices simultaneously.

28
I cannot make multipoint connection.
accordion iconaccordion icon

For details on how to connect, check the instruction manual. Also check the instruction manual of your Bluetooth-compatible device.

29
There is no sound.
accordion iconaccordion icon

Check that the product is connected via Bluetooth to the device in use. If this is not paired, configure by following the procedure shown here.

Check that the volume on your device is not turned down.

Restart the audio app that you are using for listening. Restarting the device that you are using, such as the smartphone or PC, may resolve the problem.

30
Charging is not possible. (Status indicator(LED) does not light during charging.)
accordion iconaccordion icon

Please peel off the protective sticker on the back of the earphone body and set it in the carrying case before charging.

31
The sound volume is low.
accordion iconaccordion icon

Because this product is an open-ear type affected by outside noise, the listening environment may make it difficult to hear sound from the product.

In order to use PSZ technology for sound leakage prevention, playback at a higher volume than regular earphones is required. This is a characteristic of the product, not a malfunction.

This problem may be resolved by adjusting how the product is worn. Check that the product is being worn correctly.

32
The sound is interrupted.
accordion iconaccordion icon

This product uses the 2.4 GHz frequency band. Interference from other wireless devices such as microwave ovens that use the 2.4 GHz band may cause interruptions in audio.

33
Other people have trouble hearing my voice during a call.
accordion iconaccordion icon

Make sure that the device/meeting tool microphone volume settings are sufficient.

34
My ears hurt.
accordion iconaccordion icon

If you feel any pain or abnormality, immediately stop using the product.

Check that the product is being worn correctly.

35
What operations are available with the buttons?
accordion iconaccordion icon
button operations
36
Can voice assistants be used?
accordion iconaccordion icon

These can be used. For details, check the instruction manual.

37
I have lost one of the earphones.
accordion iconaccordion icon

Left or right earphones cannot be purchased separately.

38
Can the carrying case be purchased separately?
accordion iconaccordion icon

At present, the carrying case is not available for purchase separately.

39
Can ear cushions be removed and replaced?
accordion iconaccordion icon

Ear cushions cannot be removed or replaced. Forcible attempts to remove the ear cushions may result in damage.

nwm ONE
01
There may be some oddities in functionality when using a wired connection to iPhone 15 Series, iPad, and some smartphones.

Update the nwm Connect app firmware to the latest version.
* When updating, please also update the application to the latest version. (App version: Android 1.4.0 / iOS 1.4.0 or later)

Update is required for the following firmware version for this product.
Product firmware: 1.0.2

02
During pairing, the LED does not blink.

Press and hold the multifunction button for approximately 5 seconds, and check that the status indicator (LED) is blinking blue and red (pairing mode).

03
“nwm ONE” does not appear in the device list.

“nwm MBH001” appears in the device list.
Press and hold the multifunction button for approximately 5 seconds to switch to pairing mode, and then check the device list again.

04
What codecs are supported?

This product supports SBC, AAC, and LC3.

05
Can I make calls?

This product features a built-in microphone, enabling hands-free calling.

06
How is the waterproof performance of the product?

This product does not have a waterproof construction.

07
How do you turn the power on and off?

To turn the power on and off, press and hold the multifunction button for approximately 2 seconds.

08
Does the product have an auto power off function?

While in pairing mode, power turns off automatically if no connection is made in 5 minutes.

Additionally,  auto power off can be set to activate if there is no input (music  playback/calling, etc.) for a set period of time while the product is  connected.
* This function is off as a factory default.
It can be configured in the nwm Connect app.

09
Does the product have a volume limiting function?

The volume limiting function is not supported.

10
Can voice assistants be used?

These can be used. For details, check the online instruction manual.
Depending on the specifications of the connected device, the operations above or operations on the connected device may not be possible.

* Some smartphones offer a choice of connection using Bluetooth, Classic Audio, or LE Audio.
The voice assistant function may not be available in some cases when connecting via LE Audio. If this occurs, pair the product again, and connect using Classic Audio in the settings on the connection device.
Carefully read the instruction manual of the device to connect to before use.

11
The sound is interrupted.

This product uses the 2.4 GHz frequency band. Interference from other wireless devices such as microwave ovens that use the 2.4 GHz band may cause interruptions in audio.

12
I can’t hear myself/my voice is too small.

Check the input/output settings on the connected device.
Check that the microphone holes of the product (at two locations) are not blocked.
Check that the product is being worn correctly. If the L and R (left and right) sides are put on in the opposite way around, the microphone pickup direction will be changed, and the other party may not be able to hear your voice.

13
What operations are available with the buttons?
14
Can I use the product while it is charging?

Yes, you can.
When using it, use the supplied USB Type-C cable.

15
Can I use the product via a wired connection?

Yes, you can. For details, check the online instruction manual.
For a wired connection, use the supplied USB Type-C cable.

16
Can I use the product via an analog connection?

No, you cannot.
The product does not support use with a USB-C to φ3.5 mm cable or conversion plug.

17
Can the supplied USB cable be purchased separately?

The USB cable is not available for purchase separately.

18
I periodically hear notification sounds.

There are two types of periodic audible notifications provided by this product.
• When the battery level is low
 The status lamp lights orange.

• As a reminder (mute status reminder) when muted during a call
 The status lamp lights red.
 * The mute status reminder is set to off as a factory default.
   It can be turned on in the nwm Connect app.

nwm MWE001
01
Can I make calls?

This product features a built-in microphone, enabling hands-free calling.

02
How is the waterproof performance of the product?

The waterproof performance equivalent to IPX4, meaning the product is not fully waterproof. Please avoid using the product in heavy rain or washing it under running water.

03
Other people have trouble hearing my voice during a call.

Depending on the specifications of the meeting software in use, the microphone volume may be reduced each time the control button is pressed during the call. If the volume has been turned down, it can be restored by increasing the microphone volume on the device that you are using.

Depending on the model of conversion connector used, it may result in a lower microphone volume. Either try using a different conversion connector or connect to a device that does not require such a connector, then check the microphone volume.

If the product is connected to an unsupported device, use of the microphone may not be possible.

nwm MBE001
01
Only a status indicator (LED) on one side blinks in pairing mode.

In pairing mode, the status indicator (LED) on either one of the sides will blink blue and red. Both status indicators (LEDs) will not blink.

02
During pairing, the LED does not blink.

Press and hold the button on either the left or right earphone for approximately 5 seconds, and confirm that the LED is blinking blue and red (pairing mode).

03
“nwm MBE001” does not appear in the device list.

Press and hold the button on either the left or right earphone for approximately 5 seconds to enter pairing mode, and check the device list again.

04
What codecs are supported?

This product supports SBC, AAC, and aptX.

05
Can I make calls?

This product features a built-in microphone, enabling hands-free calling.

06
Can the earphone be used with one side (one ear) only?

It can be used in one ear on its own. In these cases, the other side of the earphone that is not used must be returned to the case. Both music playback and calls are possible, and these will be monaural. Both the left and right side incorporate microphones, but in this case, the microphone on the earphone in the ear is used.

07
How is the waterproof performance of the product?

The waterproof performance is equivalent to IPX2, meaning the product is not fully waterproof.
Please avoid using the product in a wet environment such as in the rain, or during strenuous exercise that causes sweating.

08
Does the carrying case incorporate a battery?

No, it is not incorporated. Connect the cable to the carrying case to charge.

09
How do you turn the power on and off?

Take out the product from the carrying case to turn on, and return it to the carrying case to turn off.

10
Does theproduct havean auto poweroff function?

While in pairing mode, power turns off automatically if noconnection is made in 5 minutes.

This product is not equipped with an auto power off functionthat can be set to activate if there is no input (musicplayback/calling, etc.) for a set period of time while the productis connected.

11
The earphones unintentionally become mute during a call.

Connect to the nwm Connect app, turn the proximity sensor “OFF,” and try again.

12
Music suddenly stops during playback.

Connect to the nwm Connect app, turn the proximity sensor “OFF,” and try again.

13
Does the product have a volume limiting function?

This function is in the app, and the maximum volume can be set to 85 dB.

14
Charging is not possible. (A status indicator (LED) is not lit during charging.)

Peel off the protective stickers on the back side of the earphones, set the earphones in the carrying case, and then perform charging.

15
The sound is interrupted.

This product uses the 2.4 GHz frequency band. Interference from other wireless devices such as microwave ovens that use the 2.4 GHz band may cause interruptions in audio.

16
What operations are available with the buttons?
button operations
17
Can voice assistants be used?

These can be used. For details, check the instruction manual.

18
I have lost one of the earphones.

Left or right earphones cannot be purchased separately.

19
Can the carrying case be purchased separately?

At present, the carrying case is not available for purchase separately.

20
I periodicallyhearnotificationsounds.

There are two types of periodic audible notifications providedby this product.

• When the battery level is low
The status lamp blinks red slowly.

nwm MBN001
01
During pairing, the LED does not blink.

Press and hold the multifunction button for approximately 5 seconds, and check that the status indicator (LED) is blinking blue and red (pairing mode).

02
“nwm MBN001” does not appear in the device list.

Press and hold the multifunction button for approximately 5 seconds to switch to pairing mode, and then check the device list again.

03
What codecs are supported?

This product supports SBC and AAC.

04
Can I make calls?

This product features a built-in microphone, enabling hands-free calling.

05
How is the waterproof performance of the product?

The waterproof performance equivalent to IPX5, meaning it is not fully waterproof. Please avoid use submerged in water, rinsing under a strong water flow, etc.  The USB cover of the earphones is an important part for retaining waterproof functionality. Check that it is closed without a gap when using the earphones.

06
How do you turn the power on and off?

To turn the power on, press and hold the multifunction button for approximately 2 seconds. To turn the power off, press and hold the multifunction button for approximately 5 seconds.

07
Does theproduct havean auto poweroff function?

While in pairing mode, power turns off automatically if noconnection is made in 5 minutes.

This product is not equipped with an auto power off functionthat can be set to activate if there is no input (musicplayback/calling, etc.) for a set period of time while the productis connected.

08
Does the product have a volume limiting function?

The volume limiting function is not supported.

09
The sound is interrupted.

·This product uses the 2.4 GHz frequency band. Interference from other wireless devices such as microwave ovens that use the 2.4 GHz band may cause interruptions in audio.

10
What operations are available with the buttons?
11
Can I use the productwhile it is charging?

No, you cannot.

12
Can voice assistants be used?

These can be used. For details, check the instruction manual.

13
Do you sell just the included cord clip and sliders?

We do not sell just the cord clip and sliders.

14
I periodicallyhearnotificationsounds.

There are two types of periodic audible notifications providedby this product.

• When the battery level is low
The status lamp blinks red slowly.

One-Year Limited Warranty for NTT Sonority Products

Crowdfunding supporters on Indeigogo, please contact us by clicking on the button down bellow.

Contact Indeigogo

Customers who purchased from Amazon and would like support in accordance with Amazon's policy, please contact Amazon directly.

Contact Amazon

This Limited Warranty is provided by NTT sonority, Inc. (“NTT sonority”) to You, the original purchaser of an NTT sonority brand or nwm brand hardware product purchased in the United States directly from NTT sonority or an Authorized Dealer (the “Product”).

Warranty Coverage

NTT sonority warrants that the Product will be free from defects in materials and workmanship under ordinary consumer use for one year from the date of original purchase (or, in the case of pre-orders and crowd-funding purchases, from the date of shipment) (the “Warranty Period”), subject to the terms, exclusions and limitations set forth herein.

During the Warranty Period, in the event of a covered defect, NTT sonority shall in its sole discretion either: (i) repair the Product using either new or refurbished parts that meet or exceed NTT sonority’s specifications for original parts; (ii) replace the Product with a new or refurbished product of the same model or, if not available, of the nearest available model; or (iii) refund the purchase price of the Product.

What is Not Covered

This Limited Warranty does not cover products purchased from anyone other than NTT sonority or an Authorized Dealer. Amazon and Indiegogo are the only “Authorized Dealers” for purposes of this Limited Warranty. Third-party resellers are not Authorized Dealers, even if they sell the product through the Amazon or Indiegogo platforms. This Limited Warranty also does not cover claims asserted by anyone other than the original purchaser of the Product, claims made outside the Warranty Period (even if the defect occurred during the Warranty Period), claims made without a dated purchase receipt or other proof of purchase or claims for Products that have had their serial numbers or rating labels altered or removed. And it does not cover products purchased in “AS IS” condition or sold or noted as “DEMO” or “DISPLAY”.

This Limited Warranty does not cover defects, damages or loss caused by: (i) accident (e.g., accidental physical impact, submersion or exposure to liquid, humidity, smoke or extreme temperatures); (ii) theft or loss of the Product or any of its components or accessories; (iii) abuse, misuse, neglect or failure to observe any and all instructions contained in the instruction manual furnished at the time of original purchase; (iv) acts of nature such as fire, flood, water damage, lightning, power surges (or similar electrical abnormalities), earthquake or tornado; (v) interference from other equipment or incompatibility with other products, software or services; (vi) battery leakage or malfunction; (vii) use for commercial purposes or any purpose other than personal, family or household use; (viii) alteration or repair by anyone other than NTT sonority or an authorized service provider; or (ix) modification or alteration of the Product’s software, firmware or other operating systems other than via an NTT sonority- provided download or by an authorized service provider in accordance with NTT sonority-provided software, firmware or other operating system upgrade or update. It also does not cover normal wear and tear, normal depletion of consumable parts, or cosmetic damage that does not impact the functionality of the Product, such as scratches or stains, or damage that occurs during shipment or handling.

This Limited Warranty does not cover software or services, even if packaged or sold with the Product or identified as available through any owner’s manual or other materials. NTT sonority does not warrant the uninterrupted or error-free operation of the Product or any software or service available through use of the Product. Performance of the Product can be affected by factors outside the control of NTT sonority, including but not limited to system configuration, software, applications, Your internet access, data download and upload speeds, third party services for which subscriptions are required, distance from broadcasters, signal strength, and data and operator control of the system. It is Your responsibility to determine compatibility and integration with other products, services, or systems.

This Limited Warranty does not cover any accessories or any other products that may be used with the Product, whether attached to the Product or sold separately, including but not limited to any batteries, cables, straps, carrying pouches or cases, tail tips, cable holders, earphone tips, stands, cable boxes, adaptors, removable covers or cushioning, etc. It does not cover the Product’s packaging or packing materials. And, it does not cover installation, removal, setup, adjustment, maintenance, signal reception issues, cleaning, periodic checkups, or alterations or adjustments required for operation outside the United States.

LIMITATION OF LIABILITY

TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE WARRANTY AND REMEDIES SET FORTH HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES. ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, SO THE FOREGOING LIMITATION MAY NOT APPLY TO YOU.

TO THE MAXIMUM EXTENT PERMITTED BY LAW, NTT SONORITY SHALL HAVE NO LIABILITY WHATSOEVER FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR SPECIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR LOSS OF DATA, WHETHER RESULTING FROM BREACH OF WARRANTY, TORT, CONTRACT OR ANY OTHER LEGAL OR EQUITABLE THEORY, AND THE ENTIRE LIABILITY OF NTT SONORITY SHALL BE LIMITED TO THE AMOUNT PAID BY YOU FOR THE PRODUCT. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

How to Obtain Warranty Service

For instructions on how to obtain service under this Limited Warranty, please contact us at 3-20-2, Nishishinjuku, Shinjuku-ku, Tokyo 163-1432 JAPAN or customer-us@support-ntt-sonority.com. Our customer service team may ask you some questions to determine whether Your Product is eligible for warranty service. NTT sonority or our service partner will provide You with a pre-paid shipping label that You can use to send us the Product, along with Your dated purchase receipt or other valid proof of purchase. If we determine that Your Product exhibits a covered defect, we will, at our option, repair or replace the Product and ship it to You at our cost, or refund You the purchase price of the Product. If Your Product does not exhibit a covered defect, or if it is otherwise ineligible for service under this Limited Warranty, we will make reasonable efforts to return the Product to You at Your cost upon request, but we make no guarantees and accept no liability for ineligible Products shipped to us.

If NTT sonority elects to repair or replace the Product, the repaired or replaced Product shall continue to be covered under this Limited Warranty for the remaining portion of the original Warranty Period, or for three (3) months from the date the repaired or replaced Product is delivered to You, whichever is longer. Any replaced parts (if the Product is repaired), or the original Product (if a replacement Product or refund is provided), will not be returned to You and will become the property of NTT sonority and may be disposed of. It is Your responsibility to remove or backup any data, media, software or other materials stored or preserved in the Product before sending the Product to us. It is possible that such materials may be destroyed, lost or reformatted during service, and we will not be responsible for any such damage or loss.

Additional Information

This Limited Warranty applies to Products sold on or after March 1, 2023. NTT sonority may amend the terms of this Limited Warranty from time to time without notice; however any such changes shall only apply to Products purchased after the effective date of the change. To obtain a copy of the NTT sonority Limited Warranty in effect on the date that You purchased Your Product, please contact us at customer-us@support-ntt-sonority.com or 3-20-2, Nishishinjuku, Shinjuku-ku, Tokyo 163-1432 JAPAN.

Contact us

Reach out to us with any questions or concerns. We're here to help.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

Information on Proposition 65 in the state of California

warning icon

WARNING

Cancer and Reproductive Harm : www.P65Warnings.ca.gov

What is California Proposition 65?

Also known as the Safe Drinking Water and Toxic Enforcement Act of 1986, California Proposition 65 is a law that requires warning to consumers if a product exposes consumers to a wide variety of chemicals known by the State of California to cause cancer, birth defects and/or other reproductive harm. Proposition 65 applies only in California.

Why do we place a Proposition 65 warning on this website?

The Prop 65 warning signifies one of two things:NTT sonority evaluated the product and determined that the product is above the “no significant risk level”
OR
NTT sonority has not evaluated the exposure level of the product, and the warning is provided based on the knowledge about the presence of a listed chemical.

Most NTT sonority products are below the Prop 65 level of concern; however, out of general caution, NTT sonority has chosen to place the Proposition 65 warning on this website.

To learn more about Prop 65, please visit the website of the California Office of Environmental Health Hazard Assessment (OEHHA) : https://oehha.ca.gov/proposition-65